Ballistic Plate Receiving Checklist: 5 Checks Before You Sign Off

Nov 17, 2026

Leave a message

Your approved sample has a model number. Your shipment arrives with ten cartons and a packing list. Can your receiving team match what arrived to the exact model on the purchase order?

Warehouse inspector checking a ballistic plate label against a packing list

Illustration of a receiving inspection.

A ballistic plate receiving checklist gives your team a consistent way to review a shipment, record discrepancies and decide what can enter inventory. Keep the purchase order, approved sample record and packing list together as you work through these five checks.

1. Match the plate label to the purchase order

Start with the exact model number on the plate label. Compare it with the purchase order and the approved sample record. Check any suffix, size designation or revision included in the order. If the identifiers differ, photograph the label and record the discrepancy so it can be resolved against the original documents.

2. Reconcile quantities by model and size

Check the quantity for each model and size on the packing list. A shipment can contain the right total number of plates with the wrong mix of sizes. Record the expected and received quantities on separate lines for each item so the receiving team can identify where the count differs.

3. Capture the batch information while the cartons are open

Record the available lot or batch identifiers and link them to the receiving record. If the order spans multiple batches, keep the quantities for each batch separate. A clear photo of the relevant carton and product labels can make later reconciliation easier.

4. Document visible damage before moving stock

Photograph damaged cartons and any visible damage on the items inside. Keep affected units separate and mark them Pending review under your organization's receiving procedures. A visual inspection documents the condition at arrival. Performance claims should be checked against the applicable model documentation.

5. Close the record only after discrepancies are resolved

Assign an owner and a follow-up date to every open issue. Record the final disposition for each affected line item, such as accepted, held for review or returned. Attach any corrected documents or written responses to the original receiving record so the next person can see how the decision was made.

Copy this into your receiving log

Field What to record
Order reference Purchase order number and receiving date
Item identification Exact model, size and available batch ID
Quantity Expected and received, by model and size
Condition Packaging condition, visible damage and photo reference
Discrepancy Issue, assigned owner and follow-up date
Final disposition Accepted, held for review or returned

Still reviewing the paperwork before shipment? Read our companion guide on seven mistakes to avoid when buying ballistic protection equipment.

Send Inquiry